Suconvey Rubber

Close this search box.

When to Change Your Old Rig Safety Table Mat?

Rig Safety Table Mat

A Rig Safety Table Mat is an essential piece of equipment used on rigs to protect workers from slips, trips and falls. The mats are typically made from heavy-duty rubber that is resistant to oil spills and other contaminants. They come in various sizes and can be used anywhere on the rig where slip hazards exist, such as around drill pipe stands or stairways. They are often brightly colored for easy visibility and have anti-skid properties to reduce the risk of slips or falls.

When deciding when to replace a Rig Safety Table Mat, it’s important to inspect them regularly for wear and tear. Signs that indicate a mat needs replacing include cuts or fraying edges, deep cracks in the rubber surface, holes or tears in the fabric layer, and loss of grip due to worn down treads. It’s also wise to replace any mats that have been exposed to harsh chemicals or hot temperatures as these can degrade their material integrity over time. In some cases, it may be necessary to replace your old mat before its condition has deteriorated too much in order to ensure worker safety on the job site.

Factors to Consider for Replacement

One of the most important factors to consider when deciding whether to replace an old rig safety table mat is its condition. If the mat is frayed, torn, or otherwise damaged, you may need to replace it before it becomes dangerous. It’s always best to inspect your current rig safety table mat regularly and make a decision about replacement as soon as possible if signs of wear are present.

You also want to consider if your existing rig safety table mat will fit correctly for your current setup. If you’ve made changes that require a different size or shape than what you currently have, it might be time for a replacement. Additionally, any new regulations or standards should be taken into account when selecting a new mat so that you remain compliant with industry requirements.

Age of Mat

The age of a mat is an important factor to consider when trying to decide if it needs to be replaced. Over time, exposure to the elements can cause a mat’s surface and edges to break down or become worn. This not only reduces its effectiveness but can also be dangerous for anyone using the equipment. If there are any signs of wear and tear on a mat, it should be replaced immediately. Additionally, mats that have been used for more than 4-5 years should also be changed out even if they look like they are in good condition because their integrity may have been compromised over time. Finally, any mats that have had heavy use such as those found in gyms or commercial settings where large numbers of people pass through each day should be changed every 2-3 years so as not to put users at risk. Regularly inspecting your old rig safety table mat and changing them out when necessary is an important part of keeping your facility safe and compliant with regulations.

Condition of Mat

Mat safety tables should be inspected regularly for wear and tear. If you notice any rips or tears in the mat, it should be replaced immediately. Additionally, if the mat is showing signs of wear from frequent use, like fading or discoloration, it’s best to replace the mat as soon as possible. Unstable mats can create unsafe work conditions and increase risk of slips and falls.

Be sure to also check for excessive oil buildup on the surface of your mat. Oily residue can weaken an otherwise strong grip on a surface and cause instability when climbing onto a rig platform or working with heavy machinery. Check that all edges are flush with your flooring to ensure maximum safety and stability. Any irregularities—like bumps or ridges—should be addressed immediately by replacing your mat with a new one that has been certified by OSHA-approved material standards.

Finally, always make sure that wherever you place your safety table mat there is proper ventilation throughout the area to prevent any hazards associated with high heat levels in enclosed spaces.

Frequency of Use

The frequency of use for an old rig safety table mat should be determined by the amount of time it is used and how often. It should be inspected on a regular basis to check for any wear or damage that would render it unsafe. If the mat is used daily, then inspections should be conducted monthly at minimum. If the mat is used less frequently, such as once a week or even once a month, then inspections can possibly be done every few months. Any visible signs of tears in fabric, fraying edges, discoloration from oils and chemicals, or other signs of damage should prompt immediate replacement with a new rig safety table mat.

Benefits of Upgrading the Table Mat

Upgrading your table mat can have a number of key benefits. Firstly, it ensures that you are keeping up with the latest safety practices and technologies. This is especially important if you are in an industry where safety standards change frequently. Not only does this help to keep everyone safe, but it also helps you maintain compliance with any regulations which may apply to your workplace.

Another benefit of upgrading the table mat is that it increases its durability and performance. A newer model will be better able to withstand wear and tear over time, reducing the need for frequent replacements or repairs. This also makes it easier to keep workers safe by reducing any potential risks associated with using outdated equipment in the workplace. Finally, investing in an upgraded model can improve productivity as well as safety since they generally offer higher levels of efficiency and reliability compared to older versions

Cost Considerations for Upgrading

Upgrading an old rig safety table mat is a costly venture and should be done with careful consideration. The cost of the new table mat itself is just one factor in determining whether or not it’s worth replacing your existing one. Additional costs may include installation, shipping and any part replacements that need to be made in order to fit the new table mat. If you have an older model, there may also be hidden costs associated with updating the software and hardware to ensure compatibility with the new model.

It’s important to consider both short-term and long-term costs when deciding whether or not it’s worth upgrading your rig safety table mat. In some cases, spending more initially on higher quality materials can save money over time due to increased durability and less frequent replacements. On the other hand, if you’re only looking for a short-term solution, then opting for a cheaper alternative may make more sense financially. Ultimately, weighing different variables such as cost, quality and longevity will help determine which option makes for the better investment.

Installation and Maintenance Tips

When it comes to safety, one of the most important components is your rig table mat. It’s essential to check it regularly for tears, rips, and worn spots. If any of these signs are present, you should replace the mat immediately. Additionally, replacing the mat once a year is recommended to protect your employees from slips or falls. When selecting a new mat for your rig table, look for something that’s made from a durable material like rubber or neoprene that can stand up to repetitive use and heavy equipment. Make sure it has good traction so that workers don’t slip while using tools on top of it. Finally, be sure to properly install the new mat so that it stays in place and doesn’t move around during use.


In conclusion, when it comes to changing your old rig safety table mat, it depends on the type of mat you have and its condition. If your mat is made from a durable material and is in good condition, then you do not need to immediately change it. However, if the material is showing signs of wear or if the color has faded significantly, then it’s best to replace your old table mat with a new one. Furthermore, if there are any rips or tears in the fabric of your current rug safety table mat, this should be taken as a sign that replacing it would be beneficial for both safety and aesthetic reasons. Ultimately, whatever decision you make about when to replace an old rig safety table mat should depend upon your specific situation.



Leave a Comment

Your email address will not be published. Required fields are marked *

Most Popular

Leave a message

On Key

Related Posts

Get Your Needs With Our Expert

Suconvey Rubber manufactures a comprehensive range of rubber products. From basic commercial compounds to highly technical sheets to match stringent customer specifications.